Accu oplader 10.8-18v / 3.4A SP81990 - SP Tools

Accu oplader 10.8 - 18v / 3.4A

Multi Function Microprocessor controlled 3.6, 12 & 18volt Battery Chargers have a 9 stage control & protection system

1. Programmable over-charge voltage
2. End of charge current
3. Temperature cut-off
4. Safety charging time
5. Receive charge termination signal
6. Over-charge voltage protection
7. Over-charge current protection
8. Short circuit protection
9. Relay control protection

• Output Voltage: 10.8-18v / 3.4A
• Input Voltage: 100-240vac 50/60Hz
• Operating Temp: 0 to 40°C
• Storage Temp: -20 to 70°C